UVDTF Gang Sheet Builder

UV-DTF APPLICATION

• Start with a clean cup - do not clean cup with alcohol
• Measure your cup and trim any excess Pieces that may overlap.
• Before removing the white backing make sure to face down the transfer and slowly remove the white paper. Make sure all pieces lift off while peeling.
• Make sure the wrap is lined up correctly and began pressing, starting with one side and working around the cup. Remember: These wraps are permanent, once your wrap hits any surface, it WILL stick, pulling up on it may result in your decal breaking.
• Once you have worked all the way around the cup go over each part with a squeegee. Make sure there are no air bubbles as you go.
• Your last step is to remove that clear film carrier sheet. Go slow, the carrier sheet may be hard to remove - just go slow. When peeling, we recommend you peel back laying the film back onto itself rather than pulling it UP while peeling.

HTV APPLICATION INSTRUCTION:

Temp: 300-320

Time: 10 Seconds

Pressure: Heavy

peel: Hot

DTF TRANSFER APPLICATION INSTRUCTION:

Temp: 310-320

Time: 15sec

Pressure: Heavy

Peel: Cold

WE ARE Not responsible for user error.This includes - but is not limited to - damage while applying the wrap or damage from washing.

Processing time is 3-5 business days. All Sales Are Final